Home > Articles

American Port: Introduction to Longivew Port

Longview Port Map

The location of Longview Port is shown on the map.

Longivew geographical longitude: -94.7404891, latitude: 32.5007037. One of the major ports for inland point routes in the United States

Longview is located in Longview, Washington State, in the northwest United States. It is located in the southwest of Washington State and borders the north bank of the lower reaches of the Columbia River to the south. The port is an important industrial port in the United States, about 60 nautical miles away from the mouth of the river. It is about 43 nautical miles south from the port of Portland (PORTLAND). The maximum draft allowed for ships entering the port is 12.19 meters. The tidal range is 0.61-1.23 meters. The prevailing wind direction is west (summer) and southeast (winter). The water depth for communication between ships and the port is dredged to 12.19 meters (average low tide). The water depth of the main channel of the Columbia River is the same as that of the Columbia River. The Longview Marina has no restrictions on the size of the vessel except for the draft of the vessel. The Columbia within the Longview range provides a safe and spacious place to turn around and anchor. The port has 2 rail lines and Interstate 5. There are no ship repairs, dinghy, repatriation and dry dock facilities, towing, sewage facilities, fresh water, food, fuel supply and medical conditions.

Consul: The nearest one is the consul in Oregon. The annual import and export tonnage is 6 million short tons. The anchorage facilities include berths 1-4, 656.84 meters long, berth 5, 156.97 meters, and berths 6-7, 457.2 meters long. The covered storage area is 102,502.89 square meters, and the grain storage fuel is 5,165,000 bushels. Container lifting capacity 30 short tons. The container handling speed is 20 boxes per hour, and the dry bulk storage tank is 25,000 short tons. The warehouse accommodation area is: No. 1 transfer cargo shed, 2855 square meters, No. 2 transfer cargo shed 2234 square meters, No. 3 transfer cargo shed 3813 square meters, 6 No. 9,351 square meters of transit shed, 1,179 square meters of storage cabin A, 1,852 square meters of storage cabin B, 5,034 square meters of warehouse No. 8, 5,893 square meters of warehouse No. 9, 9,375 square meters of warehouse No. 10, and 4,459 square meters of warehouse No. 13 meters, Warehouse No. 14 is 5796 square meters, Warehouse No. 15 is 3121 square meters, Warehouse No. 16 is 4514 square meters, Warehouse No. 17 is 2006 square meters, Warehouse No. 18 is 28694 square meters, Warehouse No. 19 is 3716 square meters, Warehouse No. 20 is 8596 square meters. , Warehouse No. 21 is 3678 square meters, Warehouse No. 22 is 1783 square meters. The container storage area is to be expanded to 15.38 hectares, and seven anchoring facilities are available at the Port of Longview.

Equipment: The Port of Longview has a variety of equipment to handle any type of cargo, ranging from up to 600 tons toVarious smallest open-hatch unloading cartons, including 3 electric WHIRLEY cranes with a lifting capacity of 50-60 tons, 1 30-long-ton container crane, 12 40-ton trailers, etc.

Longview is an important shipping port in the United States. There are 239 ports in the United States, including: Atlanta (atlanta, ga), Baltimore (baltimore, md), Birmingham (birmingham, al), Boston (boston) , ma), Charleston (charleston, sc), Charlotte (charlotte, nc), Chicago (chicago, il), Cincinnati (cincinnati, oh), Cleveland (cleveland, oh), Columbus (columbus, oh), etc.

Tags: longivew portoflongview longviewshipping portofamerica